Comparison with competitors

To make a detailed comparison of RVS-IPI products with competitors, consider their technologies.

Tribotechnical compositions are divided into:
Additives.
Supplements.
The principle of operation of tribotechnical additives
Additives create a servovite film 3-5 microns thick on the metal surface.

Usually, the servovite film is used in engine oil additives. It allows you to reduce the coefficient of friction. In a passenger car, after running about 5 thousand kilometers, this film is destroyed. A complete replacement of the engine oil is required, otherwise the engine will wear out.

All additives create various films of temporary and short-term action.

The principle of operation of tribotechnical additives
All tribotechnical additives are created on the basis of various minerals.

Additives are divided into:

Geomodifiers.
Metal air conditioners.
Remetalizants.
Revitalizants.
Remetalizants are a product of mixed effects. In addition to minerals (mainly serpentines), metal-coating additives are always added to them (soft metals, for example: lead, tin, copper, etc.).

Geomodifiers - in addition to minerals, plastic polymers (various chemically active substances) are added to them.

Metal conditioners - in addition to minerals, metal-coating additives and chemically active substances are added to them.

Revitalizants - consist only of minerals, without side elements. Basically, these are the minerals of the olivine group.

The principle of action of the products Suprotek, Forsan, Hado, etc. The
products of these manufacturers work with metal-coating components.

All friction geomodifiers create a surface layer by adsorption.

Adsorption is the deposition of metal elements on the metal surface with the participation of chemical processes.

The connections on the metal surface are due to dipoles.

Dipoles are deposited on the metal surface with their charges and are connected on the metal surface by molecular compounds.

Molecular bonding is a very weak type of bonding, so it only works at low loads.

The formed surface layer created by the products of these companies cannot be higher than 15-17 microns. You can verify this by studying the principle of operation of these products on the official websites of manufacturers.

These products cannot restore equipment with a wear of more than 20-25%. And to restore such wear, multiple treatments are required.

Revitalizant RVS-IPI creates a surface layer of up to 300 microns, which allows you to restore equipment with more than 50% wear!!!!

In short, RVS-IPI works on a vacancy-diffusion process (RVS-IPI technology), and competitors' products on adsorption.